Woonexpert shares a two-second hack that reduces window condensation
A HOME expert has revealed the mistake most people make that can lead to condensation forming on their windows.
Following this simple hack will keep your sills mold-free this winter.
2
2
In its viral videothe TikTok user (@yycinspectormarty) describes the reason why a common mistake can actually make things worse.
He explained that the cold weather can make it tempting to pull your blinds all the way down.
However, this small movement can increase the amount of condensation that forms on your window.
The expert used a thermal device to demonstrate the problem areas of a window to his audience.
He pointed out that the bottom of the window and the side that opens are often the coldest.
To combat this, he recommended leaving a small amount of space between your blinds and the windowsill.
He explained the science behind his helpful home hack.
“You create a thermal break with that curtain, behind the curtain there is now a cold space, that is what you don’t want,” said the TikToker.
If your window freezes over, the warm air leaking through will cause the glass to drip.
This not only causes condensation, but can also damage your window frame.
The home expert revealed the recommended gap you should leave under your blinds.
“You want to have your blinds up about two inches to allow air to flow past the window, which will help prevent some of this condensation from building up,” he said.
He pointed out that this simple change will help save your windows while providing you with privacy.
TikTok users shared their thoughts on the advice in the comments section.
“I don’t have blinds for privacy. I have them to darken the room. I open them in the morning and wipe off the water several times a day,” one viewer wrote.
Cheap Condensation Hacks
1. Use salt or cat litter
– Place bowls of salt or silica-based cat litter in areas that are sensitive to moisture. These materials are excellent at absorbing moisture from the air.
2. DIY dehumidifier
– Create a simple dehumidifier using a plastic container with a lid. Make holes in the lid, fill the container with silica gel or activated carbon and place it in damp areas.
3. Ventilate while cooking and showering
– Open windows or use exhaust fans when cooking or showering to allow moisture to escape. Even a small difference can make a big difference.
4. Wipe Windows clean
– Wipe windows and other cold surfaces regularly with a dry cloth to remove condensation. This prevents moisture from accumulating and causing mold.
5. Use houseplants
– Certain houseplants, such as lilies and spider plants, can help absorb moisture from the air. They also improve indoor air quality.
6. Keep lids on jars
– Keep lids on pots and pans while cooking to reduce the amount of steam released into the air.
7. Dry clothes outside
– If possible, dry clothes outside or in a well-ventilated area, rather than using indoor drying racks.
8. Open curtains and blinds
– Open curtains and blinds during the day to allow sunlight to warm the windows and reduce condensation. Sunlight also helps reduce mold growth.
9. Use towels wisely
– Keep towels and other fabrics away from walls and windows to prevent them from absorbing moisture and becoming damp.
10. Seal cracks and holes
– Use inexpensive weather stripping or caulk to seal any cracks or holes around windows and doors. This helps keep cold air out and warm air in, reducing condensation.
“Use a dehumidifier in the fall and winter. I do this every year,” another follower advised.
“With an HRV you could bring dry air into your home,” a third person suggested.
“They have a setting to lower the relative humidity in your home.”
“I’m a single mom living alone and your videos are so helpful! Thank you sir,” said another TikTok user.
“Curtains work pretty well. Air isn’t trapped, but cold air is slowed down enough,” one viewer noted.
